Skip to main content

Using Your Clicker in Class

ResponseCard RF LCD / RF model instructions

Change channel:

  • Press and release the "Ch" button.
  • While the light is flashing red and green, enter 2 digit channel code. (ie. channel 1=01, channel 21=21).
  • After the second digit is entered, press and release the "Ch" button.

Respond to Questions:

Press the number/letter buttons on the keypad to respond to polling questions.
Do Not press the "Ch" button.

  • Red indicate response was not received
  • Green indicate response was received
  • Yellow(Multiple Flash) indicate sending response
  • Yellow(Single Flash indicate poll not opened
Student ResposeCard RF LCD and ResponseCard RF User Guide

XR model instructions

Change channel:

  1. Press MENU.
  2. Highlight “Change Channel”. (Use the YES button for down and the NO button for up).
  3. Press ENTER.
  4. The next screen will show you which channel the ResponseCard is programmed to. Use the numeric keys to enter your channel.
  5. Press ENTER when the correct channel number is entered.
  6. Your screen will display the following:
    Channel Changed
    Receiver Found
  7. You will then automatically be taken into Presentation Mode.

Sending responses in presentation mode:

To be used during a live presentation when the speaker wants immediate feedback from the audience.

  1. Press MENU.
  2. Highlight “Presentation” (Use the YES button for down and the NO button for up).
  3. Press ENTER.
  4. Your screen will display the following:
    Presentation
    Mode
    Channel Number
  5. Press the button on the ResponseCard that corresponds to your answer choice.
  6. Your answer can be verified on your screen after you make your selection.
    Your Answer:
    1/A
  7. The checkmark will appear on the right-hand side of your screen confirming your answer was received.
Student ResponseCard XR User Guide.

If you receive a message stating "Not accepting answers!" this means that polling was closed and you may not have answered the question. If you sent a successful answer before polling closed, then TurningPoint will accept the last successfully transmitted answer.