S. Thekkoot, R. Islam and S Morin*(2022), “Efficiency of nanostructured CuxCo3-xO4 and NixCu1-xCo2O4 electrodes as electrocatalysts for the oxygen evolution reaction – revisited” submitted Electrochim. Acta, October 27, 2022. Manuscript number: EA22-4713.
M. Fattah and S. Morin* (2022), “The effect of electrodeposition current density on the microstructure and corrosion behaviour of nanostructured Ni coatings electrodeposited from deep eutectic solvent on medium carbon steel”, submitted to Mat. Chem. Phys. November 2022. Manuscript number: MATCHEMPHYS-D-22-0518
T. Gong (2021), “Electronic properties of anatase phase pure and iron (III) doped TiO2 nanoparticles” M.Sc. Thesis (Physics), York University.
S. Thekkoot, R. Islam and S Morin* (2021), “Improved oxygen evolution reaction performance with addition of Fe to form FeyCux-yCo3-xO4 and FeyNix-yCo3-xO4 (x = 0.5, 1 and y = 0.1, 0.15) spinel oxides” Electrochimica Acta, volume 378, Special Issue: 71st Annual ISE meeting, Belgrade online, Serbia, paper number: 138116.
M. Nazari (2019), “Iron-doped Titanium Dioxide Nanomaterials: Synthesis, Characterization and Photodegradation Catalytic Behavior” Ph.D. Thesis (Chemistry), York University.
S. Thekkout Raju and S. Morin, “Nanostructured mixed transition metal spinel oxide thin films as efficient electrocatalysts”, Extended Abstract Conference e-program: Workshop on the Electrochemistry of Electroactive Materials 2019, Borovets, Bulgaria, June 16-21, 2019.
R. Islam (2019), “Performance of nanostructured ternary metal spinel oxides as efficient electrocatalysts” M.Sc. Thesis (Chemistry), York University.
S. Thekkout Raju and S. Morin (2015), “Nanostructured mixed transition metal spinel oxide thin films as efficient electrocatalysts”, Conference e-program. Workshop on the Electrochemistry of Electroactive Materials 2015, Bad Herrenalb, Germany, May 31st, 2015. (Invited)
A. Tata, C.J. Perez, M.O. Ore, D. Lostun, A. Passas, S. Morin and D.R. Ifa* (2015), “Evaluation of imprint DESI-MS substrates for fungal metabolites analysis”, RSC Adv., 5, 75458-75464.
S. Thekkout Raju (2014), “Nanostructured mixed transition metal spinel oxide as efficient electrocatalysts” M.Sc. Thesis (Chemistry), York University.
N.V. Schhwab, M.O. Ore, M.N. Eberlin, S. Morin* and D.R. Ifa* (2014), “Functionalized porous silicon surfaces as DESI-MS substrates for small moleucles analysis”, Anal. Chem. 86(23), 111722-11726.
A. Sepehrifard, A. Stublla, S. Chen, P.G. Potvin and S. Morin* (2013), Effects of ligand LUMO levels, anchoring groups and spacers in Ru(II)-based terpyridine and dipyrazinylpyridine complexes on adsorption and photoconversion efficiency in DSSCs, Electrochimica Acta, 87, 236-444
A. Sepehrifard, B.A. Kamino, T.P. Bender, S. Morin* (2012),”Siliconized triarylamines as redox mediator in dye-sensitized solar cells”, ACS Appl. Mater. Interfaces, 4(11) 6211-6215.
S.W. Jones, S.H. Zheng, C.A. Jeffrey, S. Seretis, S. Morin, R.G. Compton* (2009) The Stripping Voltammetry of Hemispherical Deposits Under Electrochemically Irreversible Conditions: A Comparison of the Stripping Voltammetry of Bismuth on Boron Doped Diamond and Au(111) electrodes, J. Phys. Chem. C, 113, 2846-2854.
A. Sepehrifard, A. Stublla, S. Haftchenary, S. Chen, P.G. Potvin and S. Morin* (2008), “Effects of carboxyl and Ester Anchoring groups on Solar Conversion Efficiencies of TiO2 Dye-Sensitized Solar Cells”, J. .New Mat. Electrochem. Systems, 11, 281-285.
S.W. Jones, S.H. Zheng, C.A. Jeffrey, S. Seretis, S. Morin, R.G. Compton* (2008), “Stripping voltammetry of bismuth at Au(111): Mathematical modelling and numerical simulation”, J. Electroanal. Chem. 616, 38-44.
M. Lewis, W.S. Bremner, E. Comer, G. Shore, S. Morin and M.G. Organ* (2008), “Metals, microwaves and the magic they create”, VDI BErichte (2039) 33-36.
G. Shore, S. Morin, D. Malik and M.G. Organ* (2008), “Pd PEPPSI-IPr-mediated rections in metal-coated capillaries under MACOS: the synthesis of indoles by sequential aryl amination/Heck coupling” Chem. Eur. J., 14(4), 1351-1356.
A.A. Farah, S.H. Zheng, S. Morin, F. Bensebaa and W.J. Pietro* (2007), “Thiolated poly(ε-caprolactone ) macroligand with vacant coordination sites on gold substrate: Synthesis and Surface Characterization” Surf. Sci. 601(7), 1677-1683.
T. Mengistu, L. DeSouza and S. Morin* (2006), “Adsorption of protein on flat functionalized Si (111) surfaces studied using MALDI-MS”, J. Chromatogr. A, 1135(2),164-202.
A.A. Farah, N.T. Hall, S. Morin and W.J. Pietro* (2006), “Poly(ε-caprolactone)-block-polystyrene Metallopolymers via Sequential Ring Opening Polymerization (ROP) and Atom Transfer Radical Polymerization Condition with in-situ Generated Ruthenium Catalyst”, Polymer, 47(12), 4282-4291.
G. Shore, S. Morin and M.G. Organ* (2006), “Catalysis in capillaries by Pd thin films using microwave-assisted continuous-flow organic synthesis (MACOS)” Angew. Chem. Int. Ed., 45(17), 2761-2766.
T.Z. Mengistu, V. Goel, J.H. Horton*, S. Morin* (2006), “Chemical Force Titrations of Functionalized Si(111) Surfaces” Langmuir, 22(12), 5301-5307.
D. Christendat, M.-A. David, J. Shao, K.M. Kadish, S. Morin* and A.B.P. Lever* (2005), “Synthesis and Characterization of Hexadecachloro- and Hexadecafluorophthalocyanine Ruthenium(II) Complexes” Journal Porphyrins & Phthalocyanines, 9, 626-636.
T.Z. Mengistu, L. DeSouza and S. Morin* (2005), “Functionalized porous silicon surfaces as MALDI-MS substrates for protein identification studies”, Chem. Comm., 45, 5659-5661.
K.M. Poduska and S. Morin* (2003), “Electrochemical Cell for In-situ Magneto-optic Kerr Effect Measurements”, Rev. Sci. Inst., 74, 4723-4727.
C. Mei, S. S. Deshmukh, J. Cronin, S. Cong, D. Chapman, N. Lazaris, L. Sampaleanu, U. Schacht, K. Drolet-Vives, M. Ore, S. Morin, B. Carpick, M. Balmer, M. Kirkitadze* (2019), Aluminum phosphate vaccine adjuvant: Composition and size analysis using offline and inline tools, Comput. Struct. Biotechnol. J. 17, 1194.
K. Kalbfleisch, S. Deshmukh, C. Mei , M. Ore, W. Williams, I. Durowoju, J. Duprez , S. Morin, B. Carpick and M. Kirkitadze* (2019), “Identity, Structure and Compositional Analysis of Aluminum Phosphate Adsorbed Pediatric Quadrivalent and Pentavalent Vaccines”, Comput. Struct. Biotechnol. J.,17, 14-20.
T. Jiang, N. Hall and S. Morin* (2005), “Quantitative Analysis of Tin Electrodeposit Morphology by Atomic Force Microscopy”, Thin Solid Films, 471(1-2), 76-85.
B. Wu, J. Grigull, M.O. Ore, S. Morin, K. A.White* (2013), “ Global organization of a plus-strand RNA virus genome”, PLOS-Phatogens, https://doi.org/10.1371/journal.ppat.1003363
Y. Liang, M.O. Ore, S. Morin and D.J. Wilson* (2012), “Stabilizing inhibitors of transthyretin amyloidogenesis specifically disrupt ordered aggregation of transthyretin (105-115)”, Biochem., 51(16) 3523-3530.
Y. Liang, S.Z. Jasbi, S. Morin and D.J. Wilson* (2010), “Rational manipulation of amyloidogenesis using an atomic level map of peptide-fibril interactions”, Biochem. 49(28) 5829-5831.
Y. Liang, S. Zahedi Jasbi, S. Haftchenary, S. Morin and D.J. Wilson* (2009), “Binding Interactions in Early and Late Stages Amyloids of TTR(105-115)”, Biophys. Chem. 144, 1-8.
S. Lombardo, S. Zahedi Jasbi, S.-K. Jeung, S. Morin* and G.F. Audette* (2009), “Initial Studies of Protein Nanotube Oligomerization from a Gold Surface”, J. Bionanosci., 3(1) 61-65.
M.Cascajo-Castresana, S. Morin and A.M. Bittner* (2021), “The ice-vapour interface during growth and sublimation”, Atmos. Chem. Phys., 21, 18629–18640.
C.A. Jeffrey, S. Zheng, E. Bohannan D.A. Harrington and S. Morin* (2006), “X-ray Characterisation of As-deposited, Epitaxial Films of Bi(012) on Au(111)”, Surf. Sci. 600(1) 95-105.
C.A. Jeffrey, D.A. Harrington and S. Morin* (2002), “In-situ Scanning Tunneling Microscopy Study of Bismuth Electrodeposition on Au(111)”, Surf. Sci., 512, L367-L372.
N. Mohtat, M. Byloos, M. Soucy, S. Morin and M. Morin* (2000), “Electrochemical Evidence of Adsorption of Alkanethiols on Two Sites on Ag(111)”, J. Electroanal. Chem., 484, 120.
R. Boukherroub*, S. Morin, D.D.M. Wayner*, F. Bensebaa, G.I. Sproule, J.-M. Baribeau, D.J. Lockwood* (2001), “Ideal Passivation of Luminescent Porous Silicon by Thermal, Noncatalytic Reaction with Alkenes and Aldehydes”, Chem. Mater., 13, 2002-2011.
R. Boukherroub, S. Morin, D.D.M. Wayner, D.J. Lockwood* (2001), “Pickled Luminescent Silicon Nanostructures”, Solid State Commun., 118, 319-323.
P. Allongue, C. Henry de Villeneuve, S. Morin, R. Boukherroub, D.D.M. Wayner* (2000), “The Preparation of Ideally Flat H-Si(111) Surfaces by NH4F Etching Revisited”, Electrochim. Acta, 45, 4551-4598.
H.-Z. Yu, S. Morin, D.D.M. Wayner*, P. Allongue and H. Henry de Villeneuve (2000), “Molecularly Tunable “Organic Capacitors” at Silicon/Aqueous Electrolyte Interfaces”, J. Phys. Chem. B, 104, 11157-11161.
R. Boukherroub*, S. Morin, D.D.M. Wayner and D.J. Lockwood (2000), “Thermal Route for Chemical Modification and Photoluminescence Stabilization of Porous Silicon”, physica status solidi a, 182, 117-121.
R. Boukherroub, S. Morin, P. Sharpe and D.D.M. Wayner* (2000), “Insights into the Mechanisms of Formation of Si-OR Monolayers from the Thermal Reactions from Alcohols and Aldehydes with Si(111)-H” Langmuir, 16, 7429-7434.
H.-Z. Yu, R. Boukherroub, S. Morin, D.D.M. Wayner* (2000), “Facile Interfacial Electron Transfer Through n-Alkyl Monolayers Formed on Silicon (111) Surfaces”, Electrochemistry Communications, 2, 562-566.
R. Boukherroub, S. Morin, F. Bensebaa and D.D.M. Wayner* (1999), “New Routes to the Formation of Si-C Monolayers on Si(111)”, Langmuir, 15, 3831-3835.
H. Matsushima, S.-W. Lin, S. Morin and O. M. Magnussen* (2016), “In situ video-STM studies of the mechanisms and dynamics of electrochemical bismuth nanostructure formation on Au”, Faraday Discuss, 193, 171-185.
S.H. Zheng, K. Krug, F. Golks, D. Kaminski, S. Morin*, O.M. Magnussen (2010), “Study of Bi UPD structures on Au(100) using surface x-ray scattering” J. Electroanal. Chem., 649,189-197. (invited contribution)
A. Lachenwitzer, S. Morin, O.M. Magnussen and R.J. Behm* (2001), “In-situ STM Study of Electrodeposition and Anodic Dissolution of Ni”, Phys. Chem. Chem. Phys., 3, 3351-3363.
F. Maroun, S. Morin, A. Lachenwitzer, O.M. Magnussen and R.J. Behm* (2000), “Admetal-Induced Substrate Surface Restructuring During Metal on Metal Electrochemical Deposition Studied by in-situ STM”, Surf. Sci., 460, 249-263.
S. Morin, A. Lachenwitzer, O.M. Magnussen and R.J. Behm* (1999), “Potential-Induced Step Flow to Cluster Growth Transition: Ni Deposition on Ag(111)”, Phys. Rev. Lett., 83, 5066-5069.
S. Morin, A. Lachenwitzer, O.M. Magnussen and R.J. Behm* (1999), “Comparative In-situ STM Studies on the Electrodeposition of Ultrathin Nickel Films on Ag(111) and Au(111) Electrodes”, J. Electrochem. Soc., 146, 1013-1018.
B. Pierozynski, S. Morin and B.E. Conway* (1999), “Adsorption of Guanidonium and Gemdimethyl-Guanidonium Cations on the H UPD at Pt(hkl) Surfaces; Lattice-Specific Anion-Mimetic Effects”, J. Electroanal. Chem., 467, 30-42.
B. Pierozynski, S. Morin and B.E. Conway* (1999), “Reactivity and electrosorption of functionalized small molecules at single-crystal Pt surfaces” Proc. Sym. on “Molecular Functions of Electroactive Thin Films” (eds. ) The Electrochemical Society Inc., New Jersey, Vol. 98-26, 225-245.
B.E. Conway*, J. Barber and S. Morin (1998), “Comparative evaluation of surface structure specificity of kinetics of UPD and OPD of H at single-crystal Pt Electrodes” Electrochimica Acta 44(6-7), 1109-1125.
J. Barber, S. Morin and B.E. Conway*, “Specificity of the Kineitcs of H2 Evolution to the Structure of Single-Crystal Pt Surfaces, and the Relation Between OPD and UPD H”, J. Electroanal. Chem., 446, 125-138 (1998).
J. Barber, S. Morin and B.E. Conway* (1997), “Dependence of Electrocatalysis in the H2 Evolution Reaction on the Structure of Single-Crystal Pt Surfaces”, Proc. Sym. on “Electrochemical Surface Science of Hydrogen Adsorption and Absorption” (eds. G. Jerkiewicz and P. Marcus), The Electrochemical Society Inc., New Jersey, Vol. 97-16, 101-117.
S. Morin, B.E. Conway*, G.J. Edens and M.J. Weaver (1997), “The Reactive Chemisorption of Acetonitrile on Pt(111) and Pt(100) Electrodes as Examined by In-situ Infrared Spectroscopy”, J. Electroanal. Chem., 421, 213-220.
S. Morin* (1996), “Kinetics of Underpotential deposition of hydrogen on Pt single-crystal electrodes using AC impedance spectroscopy”, Electrochemical Society Interface, 5 (2) 51-54. ” Summary Report to The Electrochemical Society Inc. for the 1995 Joseph W. Richards Summer Research Fellowship.
S. Morin, H. Dumont and B.E. Conway*, “Evaluation of the Effect of Two-Dimensional Geometry of Pt Single-Crystal Faces on the Kineitcs of UPD of H Using Impedance Spectroscopy”, J. Electroanal. Chem., 412, 39-52 (1996).
S. Morin and B.E. Conway*, “Surface Structure Dependence of Reactive Chemisorption of Aceto-nitrile on Single-crystal Pt Surfaces”, J. Electroanal. Chem., 376, 135-150 (1994).
J. Lipkowski*, L. Stolberg, S. Morin, D.E. Irish, P. Zelanay, M. Gamboa and A. Wieckowski, “Probing Pyridine Adsorbed at Gold Electrodes by Chronocoulometry, Radiochemistry and Raman Spectroscopy”, J. Electroanal. Chem., 355 (1993) 241-262.
L. Stolberg, S. Morin, J. Lipkowski* and D.E. Irish, “Adsorption of Pyridine at the Au(111) Solution Interface”, J. Electroanal. Chem., 307 (1991) 241-262.
A. Hamelin, S. Morin, J. Richer and J. Lipkowski*, “Adsorption of Pyridine on the (210) Face of Silver”, J. Electroanal. Chem.,304 (1991) 195-209.
A. Hamelin, S. Morin, J. Richer and J. Lipkowski*, “Adsorption of Pyridine on the (311) Face of Silver”, J. Electroanal. Chem.,285 (1990) 249-262.
Hamelin, S. Morin, J. Richer and J. Lipkowski*, “Effect of the Surface Crystallography on the Adsorption of Pyridine at Silver Electrodes”, Proceedings of the American Electroplaters and Surface Finishers Society (AESFS) annual technical conference, Boston, MA, USA, (1990), 191-211.
A. Hamelin, S. Morin, J. Richer and J. Lipkowski*, “Adsorption of Pyridine on the (110) Face of Silver”, J. Electroanal. Chem.,272 (1989) 241-252.
Hamelin, S. Morin, J. Richer and J. Lipkowski*, “Effect of the Surface Crystallography on the Adsorption of Pyridine at Silver Electrodes”, Proceedings of the American Electroplaters and Surface Finishers Society (AESFS) annual technical conference, Boston, MA, USA, (1990), 191-211.